Cutting a MDF clock cog on a cnc router
Aluminum cutting with 1/8 2 flute endmill using vacuum table and one strip of double sided tape. Bridges were used with Visualmill 6/VisualCam1.0. (Beta Version) soon to ne released. The feed rate was 7-10 inches per minute. The aluminum did not require collant or misting for this project. A HAS presision spindle was used with ER25 collet.
This video demonstrates the hexapod router cutting a 3D face in high density foam. The video has been sped up in places to alleviate boredom 
More information can be found here: http://www.hexapodrobot.com/forum/viewtopic.php?f=14&t=12
Cutting out small part with CNC Router. also see: http://www.nixstuff.com
-cnc milling machine
-different cutting path will produce different total time to fabricate
-which cutting path will make the fastest time to fabricate?
Cutting 3/4″ black high density polyethylene plastic parts, full 30 minute long nest. Drilling holes, pockets, and cutout tool paths with a solid carbide o-flute briefly shown here. Mach3, vcarve pro and a joe 06 cnc router.
